Buy Thermoset 937
Thermoset 937 is a one component, black epoxy encapsulant, formulated to meet the needs of coating semiconductor devices on printed circuit boards. This advanced material has a fast cure, curing at 150 degrees Celsius with a void-free, smooth surface. It is environmentally resistant, with excellent resistance to moisture and thermal shock. As well as offering outstanding adhesion to a variety of materials.
Thermoset EP 937 has a viscosity between 39,000 to 56,000 cps at 25 degrees Celsius and a specific gravity of 1.49. Gel time will take approximately 1 minute at 150 degrees Celsius and working life is 1 month at 25 degrees Celsius. It is important to allow this product to cure for 20 minutes at 150 degrees Celsius in an elevated temperature circulating oven or a hot plate. Thermoset 937 hardness is 88-94 Shore D and glass transition temperature is 125 degrees Celsius. This innovative material has been formulated to withstand high temperatures while protecting semiconductor devices on printed circuit boards.
Before dispensing the product, it is highly recommended to heat the encapsulant to room temperature (20-25 degrees Celsius). This will insure that the material will dispense out of the syringes properly. Apply Thermoset 937 with a disposable applicator or by pneumatic-powered syringe. No more than 25 grams of material should be used for coating. Thermoset EP 937 has a Dielectric constant of 4.0 and the dissipation factor is 0.01. For more information of this advanced product, contact a Krayden representative and they will answer any questions that you may have.
When using Thermoset EP 937, disposable containers and utensils are recommended. Solvent cleaners can be used to remove dried epoxy from equipment. Before handling this material, reading and understanding the Thermoset EP 937 MSDS is extremely important. When stored in its unopened container between 0 to 5 degrees Celsius, shelf life will be 6 months from manufacture. If the temperature exceeds 0 to 5 degrees Celsius during storage, the shelf life will be shortened. Product needs to be stored away from heat sources such as hot plates or ovens.
LORD is a well renowned manufacturer of advanced adhesives, sealants and encapsulants. They provide innovative resolutions for a wide variety of industries with locations all around the world. Thermoset 937 is one of the many cutting-edge encapsulants produced by LORD. This product offers excellent coating for semiconductor devices on printed circuit boards. For more information including the different sizes available or how to dispense this product, contact Krayden, a certified distributor of LORD products. Also, take a look at the Thermoset EP 937 TDS.
