Molykote G-Rapid Plus Paste is a Solid Paste Lubricant with Low Friction for the Assembly and Running in of Metallic Components.
Molykote G-Rapid Plus is a paste designed for lubricating with low friction designed for running-in of metallic components and assembly. The specialty lubricant offers high pressure absorption capacity, suppresses stick-slip, provides emergency running performance and prevents seizure and scoring. It is well suited for the press-fit production of all types of machine elements, as a running-in lubricant for new machines and gears. It can also be used to lubricate, tooth gearing, splined shafts, moving screws, worm gearing, pumps, fittings, guides on machine tools, pulleys, wheel flanges, roller bearings and bolts.
The color of Molykote G-Rapid Plus Paste is black and the density at 20°C is 1.40 g/ml. It is composed of mineral oil and solid lubricants. The advance product has a service temperature range of -35° to 450°C. It offers good coverage, facilitates disassembly and reduces formation of fretting corrosion. Four ball tester weld load is 5300N and the Almen Wieland machine OK load is less than 20,000N. Unworked penetration is 255-275 mm/10 and it is resistant to water.
Molykote G-Rapid Plus Solid Lubricant Paste Features:
- Low Friction Coefficient
- High Pressure-Absorption Capacity
- Prevents Seizure and Scoring
- Suppresses Stick-Slip
- Reduces Formation of Fretting Corrosion
- Facilitates Disassembly
- Good Coverage
- Provides Emergency Running Performance
Before applying Molykote G-Rapid Plus, clean all sliding surfaces or contact areas. Apply the paste using a brush, cloth, synthetic sponge or window leather. Do not use in excess as with grease lubrication. Vigorous rubbing into metal surfaces will improve adhesion. It is strongly recommended to not mix with oils and greases. For more information on the proper application methods, contact Krayden and a technical representative will assist in answering any questions that you may have.
Before handling, reading the Molykote G-Rapid MSDS is recommended for product safety information. Shelf life of the product is 1800 days from the date of production when stored in its original container at or below 20°C. Molykote G-Rapid Plus Paste is available in different standard container sizes. Detailed information can be obtained by containing a Krayden Technical Representative. This product is not represented as suitable or tested for medical or pharmaceutical uses. No respiratory protection is needed when applying this material. It may cause moderate irritation if it comes in contact with skin and eyes.
Molykote a division of Dow Corning is an innovative company that offers a wide variety of specialty chemicals. The smart lubrication solutions save energy, control friction, extend lubrication intervals to reduce maintenance and to enhance equipment reliability. Molykote G-Rapid Plus is a solid lubricating paste with low friction coefficient for assembly and running-in of metallic components. For more information in regards to the sizing, proper application or the safe handling, contact Krayden and a technical representative will assist you. Krayden is an authorized distributor of Molykote products. More information on the specialty lubricant can be found on the Molykote G-Rapid Plus TDS.
