Buy Molykote 3400A
Molykote 3400A is a lead free, anti-friction coating that provides excellent lubrication and corrosion protection. This innovative product has a high load carrying capacity, excellent adhesion to metal as well as having high resistance to oil and fuels. It is a heat curing lubricant that is formulated for metal/metal combinations with medium to heavy loads and slow to medium-fast movements. The specialty lubricant also has good solvent resistance and low coefficient of friction. It is well suited for automotive applications that include pins, springs, bearings surface and linkages. It can also be used in threaded connections, fasteners, servo mechanism and instrument bearings.
Molykote 3400A Lead Free lubricant is gray in color with a density of 1.2 g/ml at 20 degrees Celsius. 3 hours at a temperature of 260 degrees Celsius and the advanced product will show no adhesion loss. Spraying and dipping applications, the lubricant will provide corrosion resistance without red rust for more than 500 hours. Using the dip-spinning application, the corrosion resistance without red rust is more than 240 hours per ASTM-B117, DIN 50021.
Before applying Molykote 3400A, it is recommended to degrease the friction surfaces with solvent to allow it to completely evaporate. The specialty lubricant needs to be stirred thoroughly then it can be applied by dipping, spraying, painting or centrifuging. The application of the coating needs to be dispersed evenly as possible with a recommended thickness of 10-15 µm. Molykote 3400A will cure in approximately 30 minutes at 200 degrees Celsius.
Information on handling precautions, limitations and proper storage of the material can be found on the Molykote 3400A MSDS. When this product is stored at or below 20 degrees Celsius in its unopened container it will have a shelf life of 24 months from the date of production. Molykote 33400A Lead Free has not been tested or deemed suitable to be used in any medical or pharmaceutical uses. The specialty lubricant is available in various standard container sizes. Information on container sizes can be obtained from a Krayden representative.
Molykote 3400A is an advanced specialty lubricant formulated to meet a wide variety of demands in automotive applications as well as threaded connections, fasteners and instrument bearings. Molykote is well renowned worldwide for the cutting-edge materials they manufacture. The lubricants are formulated by years of research and development. Molykote 3400A is an innovative lubricant that is used in a variety of industries. To contact a highly skilled and professional Sales Representative in regards to Molykote 3400A, contact Krayden, Inc., an authorized distributor of Molykote lubricants and grease. For more information, visit the Molykote 3400A TDS.