Buy LORD SC-309
LORD SC-309 is a thermally conductive material formulated to encapsulate electronic devices. It is UL 94 V-O certified providing outstanding flame retardant characteristics. This material is also environmentally resistant, providing excellent shock thermal shock resistance. Once fully mixed together, LORD SC309 has a light gray liquid appearance with a viscosity of 3600 cps at a temperature of 25 degrees Celsius.
LORD Thermoset SC-309 is a two part silicone encapsulant designed to provide thermal conductivity for electronic applications. This high quality material is capable of being cured either by room temperature or heat for maximum adhesion. LORD SC309 maintains a low viscosity allowing ease of component encapsulation compared to a wide variety of highly thermal conductive materials. The silicone material is extremely durable because it is formulated with a polydimethyl siloxane polymer that will refrain from depolymerizing when heated in confined spaces. It will also exhibit very low stress and shrinkage on electronic components as it cures.
It is important to understand the correct application methods and dangers of using LORD SC-309. Before handling LORD Thermoset SC-309, refer to the Material Safety Data Sheet. It is recommended to allow the silicone material to cure for 24 hours at a temperature of 25 degrees Celsius, for 15 minutes at a temperature of 100 degrees Celsius and 10 minutes at 120 degrees Celsius. Thoroughly stir the two components prior to mixing them together. Avoid applying LORD SC309 on surfaces that contain cure inhibiting materials such as tin salts, amines and sulfer. This innovative material will have a gel time of approximately 5 to 9 minutes at a temperature of 50 degrees Celsius and a working life of 30 minutes at a temperature of 25 degrees Celsius. The approximate shelf life of LORD SC-309 is 6 months from the date of manufacture when it is stored at a temperature of 25 degrees Celsius in its original unopened container. The container must be rotated intermittently within the container so that setting will not occur.
LORD Corporation manufactures some of the highest quality coatings and adhesives to meet the demands of a wide variety of industries. LORD SC-309 Thermally Conductive Silicone Encapsulant is an innovative silicone system manufactured with the highest quality of materials meeting the performance standards of customers globally. LORD is a worldwide leader in providing state-of-the-art technologies in formulating adhesives, encapsulants and sealants. LORD SC-309 is a high performing silicone that can be used in a variety of electronic applications. For more information about LORD SC309, contact Krayden, Inc. LORD’s certified adhesive, sealant and specialty chemical distributors. Also Visit LORD SC-309 TDS.