LORD 7800 Urethane Fast Cure Adhesive
LORD 7800 is an equal mix, two-component, urethane adhesive that is intended to bond composites, plastic, and SMC. This product takes little surface preparation and can even bond painted metals. LORD 7800 cures quickly and is able to reach full strength within 24 hours or sometimes less with no flammability issues or odor. This product is a new LORD product that is designed to be used in the transportation sector. LORD 7800 should be stored in a clean, dry environment at 65-85°F (18-30°C) in original, unopened container. After opening, protect adhesive from excessive exposure to moisture by installing desiccant cartridges and/or using dry nitrogen as an inert cover.
When it comes to preparing the surfaces for LORD 7800, the surface should be free of grease, dirt, and other contaminants. For plastics, clean the surface with a dry rag wipe or a rag dampened with solvents. Composites may require light abrasion to remove mold releases. Then wiped clean to remove dust or applied with peel-ply to expose a clean surface. Painted surfaces should be wiped clean with a lint-free cloth prior to adhesive application. Verify adhesion to the surface or consult with LORD Customer Service for assistance.
For mixing LORD 7800A, a 1:1 ratio by volume is appropriate. Handheld cartridges will automatically dispense the correct volumetric ration of each component. Once mixed, the adhesive cures rapidly. LORD 7800 adhesive will cure to full strength in 24 hours or less at 75°F(24°C), depending on the curative used.
LORD 7800 Products
Buy LORD 7800 Now:
LORD 7800 A/C LP-400 Fast Curing Urethane Adhesive
LORD 7800 A/C LP-200 Fast Curing Urethane Adhesive
LORD 7800 A/D LP-200 Fast Curing Urethane Adhesive
LORD 7800 A/D LP-50 Fast Curing Urethane Adhesive
LORD Corporation is efficient in both manufacturing and technology. LORD develops extremely reliable coating, adhesives, motion management device. LORD 7800 is a fast cure, urethane adhesive is the next generation of exceedingly effective structural urethane adhesives. It is designed for powder painted surfaces, SMC, coated metals, composites and bond engineered thermoplastics.
LORD 7800 Urethane Adhesive Literature:
Features and Benefits:
| Rapid Cure Strength | provides rapid, outstanding cure strength development, allowing for faster manufacturing and processing. |
| Consistent Cure Speeds | low exotherm cure (rate of cure less affected by bondline thickness). |
| Low Tooling Temperature | allows accelerated cure with low heated up to 220°F (104°), eliminating quality issues from ‘cold spots’ seen with other adhesives. |
| Enhanced Regulatory Profile | free of heavy metals |
| Environmentally Recommended | does not contain ozone-depleting chemicals |
| Environmentally Resistant | resists weathering, humidity, and salt spray |
| Non-Sag | remains in position when applied on vertical or overhead surfaces, allowing for greater process flexibility |
