Buy Loctite E-60NC
Loctite E-60NC is a two part, flowable, industrial epoxy potting compound. This material cures at room temperature to produce a black, rigid encapsulant that is non-corrosive to metallic components in electronic devices. The product was designed to act as an electrical insulator as well as providing environmental and chemical resistance. It is well suited to work with electrical components that are sensitive to corrosion.
The working life of 60 minutes at 25 degrees Celsius and the tack free time is approximately 180 minutes. Uncured Loctite 60NC has specific gravity of 1.10 at 25 degrees Celsius and the viscosity is 6,200 mPa. Tensile strength is 6,800 psi per ASTM D638 and the Dielectric strength is 550 volts/Mil. Loctite E 60NC has a tensile elongation of 8% per ASTM D638 and a shore D hardness of 85 per ASTM D-1706.
Mix ratio is 100 of the resin by weight to 91 of the hardener by weight. One the material is mixed properly it will be black opaque in color. Before applying, it is important to clean all surfaces of contaminates including films, oils, dust, mold release agent and all other contaminates. Gloves are strongly recommended to avoid contact with your skin when using Loctite E 60NC . To obtain maximum strength of the product, apply evenly on both surfaces. Allow the epoxy to cure at room temperature for 24 hours. If the time of cure needs to be sped up, heat the material up to 93 degrees Celsius.
Dealing with any kind of chemical or material it is strongly recommended to understand the application methods, proper storage and the dangers of using the product. For all of this information and more, use the Loctite E-60NC MSDS. This product needs to be stored in a dry, cool location in its unopened container between the temperatures of 8 and 28 degrees Celsius. For optimal storage, keep the material at 8 degrees Celsius. Once the epoxy has been used, do not return to the container because it may contaminate the rest of the material. Loctite E-60NC is not recommended to be used in pure oxygen or oxygen rich systems. It is also not well suited to be selected as a sealant for strong oxidizing materials.
Loctite is well-known worldwide for developing innovative materials that are used in advanced applications in a variety of industries. Loctite 60NC is a two component, flowable, industrial grade epoxy used as an encapsulant that is non-corrosive to metallic components. It is available is a wide assortment of sizes for your applications needs. For more insight on the product and information in regards to your application, contact Krayden and a certified representative will assist in answering any questions that you may have. Loctite E-60NC TDS is also full of information in regards to this product.
