Loctite 9395 is a two component, thixotropic, epoxy adhesive designed for filling, potting and fairing applications. This advanced material will cure at ambient temperature and it has good compressive strength. The epoxy paste adhesive does not contain any metallic filler and it can be used with composite substrates. It is well suited for applications where RAS/RAM considerations are important.
Loctite EA 9395 AERO Epoxy Paste Adhesive Products
Loctite EA 9395 Aero Epoxy Paste Adhesive 6 OZ Semkit
Loctite EA 9395 Aero Epoxy Paste Adhesive Quart Kit
Loctite EA 9395 Aero Epoxy Paste Adhesive Gallon Kit
Loctite EA 9395 Aero Epoxy Paste Adhesive 25 Gram E-Z Pak
Loctite EA 9395 mixed has a viscosity between 1000 to 3000 poise at 25 degrees Celsius. Part A is light blue and Part B is an olive brown-black color, once mixed thoroughly the material is a gray/blue color. Mix ratio is 100 parts by weight of A to 17 parts by weight of part B. The density of the mixed material will be 1.31 g/ml. A 450 gram mass of Loctite 9395 will have a pot life of 95 to 100 minutes at 25 degrees Celsius. More than 450 grams of this material is dangerous to mix because heat buildup can occur causing uncontrolled decomposition. The adhesive will take 1 hour to cure at 66 degrees Celsius and it will take roughly 5 days at room temperature to reach normal performance.
When using Loctite EA 9395 it is essential that all bonding surfaces are clean for optimum performance. The bonded substrates need to be held in contact until the adhesive sets in 24 hours at 25 degrees Celsius. Load application should be minimal because the adhesive has not set. This product will retain 1000 psi/6.9 MPa if it is subjected to temperatures up to 177 degrees Celsius. Loctite 9395 Dielectric Constant is 3.97 and the Dissipation Factor is 0. 33 at 10.0 KHz tested per ASTM D149, D150.
When handling any type of material, it is important to comprehend the proper storage, disposal and handling precautions. Loctite EA 9395 has a shelf life of one year when stored at room temperature in its original unopened container. When applying the product it is strongly recommended to do so in a well-ventilated area and avoid breathing in any vapors. Do not handle until you have read the Loctite 9395 MSDS. Part A/B may cause irritation to skin and eyes because it contains amines. Contact a Krayden Representative if you have any questions on the safety and the proper management of this material.
Loctite 9395 is an innovative product that is specially formulated for filling, potting and fairing applications. Loctite is recognized globally for manufacturing advanced materials that are well suited for a wide range of industries. For more information or any questions you may have relating the application methods or the variety of sizing available for purchase, contact Krayden, a specialized distributor of adhesives, sealants, solvents and more. More technical information on this cutting-edge product can be located on the Loctite 9395 TDS. Loctite 9395 was previously known as Hysol 9395.