The all new Dow Corning TC-4515 is a soft and compressible material that offers dependable cooling performance in automotive electronic components. The properties contained within this material are able to remain stable during typical environmental exposure. Dow Corning TC-4515 is designed specifically to remove heat from the heat source by dissipating it to the cold…
HumiSeal UV500 was just recently approved by Ford for use on Automotive Electronic Systems. HumiSeal UV500 is a UV dual cure, high solids elastomeric acrylate conformal coating. The innovative material offers flexibility, moisture resistance, chemical resistance and it displays excellent electrical insulation properties. UV500 is tack free after exposure to UV light and any exposed…
Dowsil 1-4105 is a single component, heat cure, low viscosity conformal coating. The innovative material has no added solvents, has a UL V-1 flammability rating and it will cure to a soft, low-stress elastomer. This conformal coating is well suited to be used as a protective coating for rigid and flexible circuit boards. It is…
Buy Sylgard 182 Dow Sylgard 182 is a silicone elastomer used in a variety of applications including general potting, industrial controls, power supplies, connectors, transformers, amplifies, high voltage resistor packs, on solar cells and circuits during processing. This high-quality elastomer is transparent making it easy for board and part inspection while providing low stress and…
Dow TC-4025 Dispensable Thermal Pad is a brand new product designed for cooling electrical devices in luminaries, LED lamps, automotive and a variety of consumer products. This two-part polydimethylsiloxane material provides excellent thermal performance. Dowsil TC 4025 Dispensable Thermal Pad is supplied in two separate liquid components. Once mixed together thoroughly it becomes a flexible…
Sylgard 567 Primerless Silicone Encapsulant has been formulated specifically for equipment parts’ moisture protection, and for various materials’ bonding. Moreover this product is usually applied in the Electronics and Electrical industries to encapsulate amplifiers and high voltage resistor packs.Sylgard 567 is classified as a hazardous waste with category rating of RCRA Hazard Class (40 CFR…
Dow Corning 111 For industrial lubricant solutions Dow Corning Corporation manufactures a complete range of silicones to meet the needs of various industries pertaining to adhesion, sealing, lubricants, rubbers, release agents, etc. The corporation has been performing research over past many years to establish the efficacy of the uses of silicone based products in various…
Dow Corning Sylgard 184 Silicone Elastomer Products Buy Now: Sylgard 184 Clear Silicone Elastomer 0.5 KG (1.1 LB) Kit Sylgard 184 Clear Silicone Elastomer 8.8 LB Kit Sylgard 184 Clear Silicone Elastomer 19.9 KG (44 LB) Kit Sylgard 184 Clear Silicone Elastomer 45 LB Cartridge Sylgard 184 Clear Silicone Elastomer 224.5 KG Kit Sylgard 184…
The low-cost silicone-based elastomer, Dow 170 is a 2-part, black, general purpose encapsulant. This silicone has good flowability, is flame resistant and also comes in a fast cure form. Some benefits of Sylgard 170 are the flexibility in curing, offering room temperature or heat accelerated options, it has a moderate thermal conductivity, is UL recognized…
Buy Sylgard 160 Sylgard 160 is a silicone elastomer that is room temperature or heat accelerate cure. This advanced material is suitable as a general potting material for a variety of power supplies including connectors, industrial controls, sensors and transformers. The material has a versatile rapid curing process controlled by temperature. Sylgard 160 is a…
Copyright © 2017 Krayden, Inc.
