The story: Krayden partnered with a company specializing in fountains. Their current supplier was discontinuing their product and they needed a replacement. What is the application? Potting wiring harnesses for lighting. What issues was the end-user having? The current supplier was discontinuing their product. What material was used to solve the issue? LORD EP6035. Why…
The story: Krayden worked closely with a national Agricultural Cultivator to develop their very first machine. Partnering with LORD, Krayden helped to solve bonding issues of their endcaps due to material composition. Fast forward more than a year later and several LORD bonding tests later, this company is producing 500+ machines a year and dominating…
LORD 7800 Urethane Fast Cure Adhesive LORD 7800 is an equal mix, two-component, urethane adhesive that is intended to bond composites, plastic, and SMC. This product takes little surface preparation and can even bond painted metals. LORD 7800 cures quickly and is able to reach full strength within 24 hours or sometimes less with no…
Buy LORD E-301AD LORD E-301AD is a low viscosity, single component encapsulation material. This innovative material offers high voltage insulation, excellent heat transfer and dimensional stability over a wide temperature range. It provides low surface tension and the compound also offers good wetting properties. It has high fluidity and is recommended for potting intricate circuitry.…
Buy Thermoset 937 Thermoset 937 is a one component, black epoxy encapsulant, formulated to meet the needs of coating semiconductor devices on printed circuit boards. This advanced material has a fast cure, curing at 150 degrees Celsius with a void-free, smooth surface. It is environmentally resistant, with excellent resistance to moisture and thermal shock. As…
Buy Circalok 6037 Lord Circalok 6037 is a thixotropic paste that offers low shrinkage, high heat transfer and a coefficient of thermal expansion that is similar to that of aluminum or copper. This advanced epoxy product is formulated to be used by the semiconductor industry. It is capable of resisting severe temperature cycling and it…
Buy LORD 3170 LORD 3170 is a two component epoxy adhesive system designed to bond a wide variety of substrates including glass, metals, reinforced plastics, ceramics and foam materials for cryogenic applications. This advanced material has minimal outgassing suitable for aerospace applications and it will provide high strengths even in cold environments. The appearance of…
Buy Circalock 6035 Circalok 6035 is a two component, low viscosity, flame retardant, room temperature curing potting material. This advanced product mixed together is visually a black color and the viscosity at 25 degrees Celsius is 12,000 cps. It has a tensile strength of 5,000 psi and the elongation is approximately 5 percent. The service…
Buy LORD 7650 LORD 7650 is a moisture cure, single-pack, urethane adhesive adhering to plastics, fabrics, prepared metals, urethane foams and polyethylene foam. It provides good water and chemical resistances while delivering good Impact resistance. LORD 7650 Urethane is a single component material that provides green strength and high initial tack. Typical applications for this…
Buy LORD 306 LORD 306 is a general purpose, high viscosity, non-sag epoxy adhesive. This innovative adhesive conforms to the military specification of MIL-1-24456 and can be heat cured or room temperature cured. The product performs at temperatures from -34 to 121 degrees Celsius. It is an adhesive system that is used for applications that…
Copyright © 2017 Krayden, Inc.
