Buy Epibond 1210
Manufactured by Huntsman, Epibond 1210 is an advanced general purpose epoxy adhesive. This material has a semi-paste consistency that is well suited for a variety of spacecraft applications. The epoxy adhesive is specifically designed for bonding a wide range of materials including wood, metal, ceramics, glass and most plastics.
Epibond 1210 is a room temperature cure, two component system with a working life of 50-75 minutes at a temperature of 77 degrees Fahrenheit. Epibond 1210B hardener can be used in varying ratios up to 100 parts by weight with part A to attain a more flexible bondline. Typical mix ratio is 100 parts 1210A resin to 65 parts of part B hardener. When mixing together, it is important that the material is above 18 degrees Celsius. This product is extremely compatible for spacecraft applications because of its high strength and low outgassing properties. It will take approximately 48 hours at a temperature of 23-26 degrees Celsius for the epoxy to be fully cured. If needed, Epibond 1210 can be heat cured at a temperature of 66 degrees Celsius, the cure time will be approximately 2 hours. The maximum service temperature of this epoxy adhesive is 93 degrees Celsius using the ASTM-D-648 test method.
Epibond 1210 A/B cured is tested under ATM-D-1002, fluid immersion for 7 days at a temperature of 23 degrees Celsius. Immersed under JP-4, Skydrol and distilled water, the epoxy adhesive shear strength is maintained. Under JP-4 Epibond 1210 has shear strength of 2,550 psi, under Skydrol 2,600 psi and under distilled water 2,700 psi. This advanced epoxy adhesive should be stored in its original, sealed containers in a dry place between the temperatures of 16-38 degrees Celsius. Under these conditions Epibond 1210 will have a shelf life 12 months from the date of manufacture. It is extremely important to understand the proper handling and precautions when handling this material. Epibond 1210 can be applied using a spatula, brush or by automatic dispensing equipment. For more information regarding the proper application methods and the safe handling of this material, refer to the Epibond 1210 MSDS.
Epibond 1210 is an epoxy adhesive specially designed with the most advanced materials available. Huntsman is recognized worldwide as a leader in providing innovative engineering and years of experience in formulating cutting edge adhesives, sealants and specialty chemicals for a wide range of industries. Epibond 1210 epoxy material is a high performance epoxy adhesive that can be used on a variety of substrates including plastics, metals and wood for spacecraft applications. For more information regarding the application or sizes of Epibond 1210, please contact Krayden, Inc. Huntsman’s certified adhesive, sealant and specialty chemical distributors. Also refer to the Epibond 1210 TDS.
