Search Site
Search Site

DOWSIL 1-4105 SILICONE CONFORMAL COATING CLEAR (440 LB) 199.5 KG DRUM

Double click on above image to view full picture

Zoom Out
Zoom In

DOWSIL 1-4105 SILICONE CONFORMAL COATING CLEAR (440 LB) 199.5 KG DRUM

DOWSIL 1-4105, formally known as Dow Corning 1-4105, is a one-part, heat cure, transparent low viscosity conformal coating. It cures to a soft, low stress elastomer with a rapid, versatile cure process controlled by temperature.
  • Buy 4 for $14,176.81 each and save 4%
  • Buy 8 for $13,822.40 each and save 7%
Product may have an MOQ, listed price may vary. A representative will contact you if so.
$14,743.86

Special Needs? Request a   

Details
DOWSIL 1-4105, formally known as Dow Corning 1-4105, is a one-part, heat cure, transparent low viscosity conformal coating. It cures to a soft, low stress elastomer with a rapid, versatile cure process controlled by temperature. DOWSIL 1-4105 is suitable for use as a protective coating for rigid and flexible circuit boards. This self-priming coating cure is ideally suited for sensitive components and fine pitch designs.
Additional Information
Additional Color, Sizes and Packaging

DOWSIL 1-4105 Clear Conformal Coating 160 g Bottle 
DOWSIL 1-4105 Clear Conformal Coating 18 kg Bladder PK 
DOWSIL 1-4105 Clear Conformal Coating 18.1 kg Pail 

SKU DC3127184
Former SKU DC1-4105440LB
Part Number DC 1-4105 440LB DRUM 199.5KG
Literature

Lamp and Luminaire Assembly   Communications and Consumer Applications   LED Lighting Applications

Product Articles

More product information regarding Dowsil 1-4105 Conformal Coating

Dowsil 1-4105 is a single component, heat cure, low viscosity conformal coating. The innovative material has no added solvents, has a UL V-1 flammability rating and it will cure to a soft, low-stress elastomer. This conformal coating is well suited to be used as a protective coating for rigid and flexible circuit boards.

Product Information

 DOWSIL 1-4105 is a heat cure, low viscosity conformal coating that has an UV indicator tjat allows for automated inspections. It also allows a good adhesion with many low-solids (no clean) and no-lead solders. 

Typical Use:
DOWSIL 1-4105 is a solventless heat cure conformal coatings are designed for rapid processing at low temperatures (below 125°C). They require soe heating to cure,offering long bath at room temperature. 
 
Application:
One-part
 
Color:
Clear
 
NVC (Non Volatile Content):
98%
 
Viscosity:
450 cP
 
Specific Gravity (Cured):
0.97
 
Durometer Shore 00:
64
 
Tensile Strength:
35 psi
 
Dielectric Strength:
500 volts/mil
 
 Volume Resistivity:
2.7 E+13 ohm*cm
 
Heat Cure at 105°C:
10 min
 
Technical Data Sheet

DOWNLOAD PDF FOR DOWSIL 1-4105 TDS

Application One Part
Color Clear
Characteristics Liquid
Cure Type Heat Cure
Specifications Approved UL 746 C, UL 94 V-O, UL 94 V-1, UL Approved, Mil Spec,
Chemistry Silicone
Packaging Drum
Product Category Coatings
Product Type Conformal Coating
Manufacturer DOW
Brand DOW
Industry Electronics, Lighting
Manufacturer SKU 3127184
Related Search Terms dow corning 1-4105 uv indicator,, dow corning 1-4105 adhesive, dow corning 1-4105 curingeps raw coating material, dow corning 1-4105 Heat cure, dow corning 1-4105 curing time, dow corning 1-4105 price, dow corning 1-4105 cost, Dow Corning 1-4105 Distribut

More product information regarding Dow Corning 1-4105 Conformal Coating

Dow Corning 1-4105 is a single component, heat cure, low viscosity conformal coating. The innovative material has no added solvents, has a UL V-1 flammability rating and it will cure to a soft, low-stress elastomer. This conformal coating is well suited to be used as a protective coating for rigid and flexible circuit boards.