| Additional Color, Sizes and Packaging | Dow Sylgard 182 Silicone Clear Encapsulant 250 ML Kit |
|---|---|
| SKU | DC2067382 |
| Former SKU | DC18245LBCAT |
| Part Number | DC 182 CAT 45LB |
| Literature | |
| Product Articles | More product information regarding Dow Sylgard 182 Silicone Encapsulant Sylgard 182 is a silicone elastomer used in a variety of applications including general potting, industrial controls, power supplies, connectors, transformers, amplifies, high voltage resistor packs, on solar cells and circuits during processing... |
| Product Information | Dow Sylgard 182 silicone clear encapsulate has a 1:10 mix ratio, a very long pot life, and a is heat curing. It should be active over a temperature range of -45 to 200 Degrees Celsius for long stages of time. Typical Use:
Potting applications for: sensors, connectors, transformers, amplifiers, solar cells, relays, and adhesive handling beam lead integrated circuits.
Cure Time at 25ºC:
336 Hours
Specific Gravity:
1.03
Tensile Strength:
1105 psi
Elongation:
105%
Tensile Modulus:
1050 psi
Dielectric Strength:
475 volts/mil
Volume Resistivity:
1.61 E+15
Shelf Life at 25ºC:
24 Months
Refractive Index:
1.41
Linear CTE (by TMA):
325 ppm/ºC
Flash Point:
93ºC
Mix Ratio:
10:1
Service Temperature:
-45 to 200ºC
Viscosity:
4,575
|
| Technical Data Sheet | DOWNLOAD PRODUCTS TDS |
| Application | Two Part |
| Specifications | Mil Spec, UL Approved, UL 746 C, UL 94 V-O, Canada WHMIS |
| Chemistry | Silicone |
| Product Category | Encapsulants |
| Product Type | Elastomer, Potting Material |
| Manufacturer | DOW |
| Brand | DOW |
| Industry | Electronics |
| Manufacturer SKU | 2067382 |
| Related Search Terms | Dow Corning 182, sylgard 182, Dow Corning 182 silicone |
Details
Dow Sylgard 182 silicone encapsulate is a two part, heat cure product that is most commonly used as a protective coating for electrical uses such as: transformers, sensors, connectors, power supplies and amplifiers. It delivers easy to repair, long pot life, flexibility, low stress, and good dielectric properties. When liquid modules are carefully mixed, the combination cures to a flexible elastomer, it is suited for the protection of electrical applications. For most practices, silicone elastomers should be active over a temperature range of -45 to 200 Degrees Celsius for long stages of time.
Additional Information
Krayden
Copyright © 2017 Krayden, Inc.