| Additional Color, Sizes and Packaging | Dow Sylgard 170 Silicone Encapsulant Elastomer Black 0.9 KG Kit |
|---|---|
| SKU | DC4017136 |
| Former SKU | 4017136-K |
| Part Number | DC 170 PT A MILPRF-23586 4.9KG |
| Literature |
|
| Product Articles | More product information regarding Sylgard 170 Silicone Elastomer Dow 170 is a low cost, 2-part, black, silicon-based elastomer, and general purpose encapsulant. This silicone has good flowability, is flame resistant, and also comes in a fast cure form. |
| Product Information | DOWSIL Sylgard 170 Fast Cure is a black, two component, silicone well suited to be used as an encapsulant or potting material. The silicone elastomer delivers stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling.
Typical Use:
Used for potting and encapsulating high voltage resistor packs, amplifiers, transformers, industrial controls, sensors, connectors, and power supplies
Mix Ratio:
1:1
Viscosity Mixed:
2,361 cP
Thermal Conductivity:
0.4 w/mK
Working Time at 25 Deg C:
3.9 Minutes
Cure Time at 25 Deg C:
0.2 Hours
Durometer Shore A:
41.45
Dielectric Strength:
350 volts/mil
Volume Resistivity:
2.42E + 15 ohm *cm
|
| Technical Data Sheet | DOWNLOAD PDF FOR SYLGARD 170 TDS SILICONE ELASTOMER |
| Application | Two Part |
| Attribute | Thermally Conductive |
| Color | Black |
| Characteristics | Liquid |
| Cure Type | Room Temperature Cure |
| Chemistry | Silicone |
| Packaging | Pail |
| Product Category | Encapsulants |
| Product Type | Elastomer, Potting Material |
| Manufacturer | DOW |
| Brand | DOW |
| Industry | Electronics |
| Manufacturer SKU | 4017136 |
| Related Search Terms | Dow Corning 170, Sylgard 170 Cure time, Sylgard 170 Fast Cure Silicone Elastomer Kit, Sylgard 170 Density, Sylgard 170 Distributors, Dow Corning 170 Sylgard, Dow Corning 170 Sylgard A B, Dow Corning Sylgard 170 Silicone Encapsulant Black, DOWSIL Sylgard |
Details
Sylgard 170 Fast Cure is a two component, black, room temperature and heat curing silicone suitable to be used as an encapsulant or potting material. Potential applications include relays, high voltage resistor packs, amplifiers, transformers, industrial controls, sensors, connectors, and power supplies. Dow Sylgard 170 Silicone Elastomer provides moderate thermal conductivity, good flowability, low viscosity, and flame resistance. The polydimethylsiloxane silicone elastomer delivers stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling. Application method includes manual mixing, automated mixing and dispensing. Dow Sylgard 170 mix ratio is 1:1. MILPRF-23586
Additional Information
Krayden
Copyright © 2017 Krayden, Inc.