Search Site
Search Site

DOW SYLGARD 160 SILICONE ELASTOMER 226.7 KG PART B

Double click on above image to view full picture

Zoom Out
Zoom In

DOW SYLGARD 160 SILICONE ELASTOMER 226.7 KG PART B

DOW’s Sylgard 160 Silicone Elastomer is a two part, 1 to 1 mix, dark gray, general purpose encapsulant with good flame resistance and flowability.
  • Buy 4 for $3,986.21 each and save 4%
  • Buy 8 for $3,886.56 each and save 7%
Product may have an MOQ, listed price may vary. A representative will contact you if so.
$4,145.66

Special Needs? Request a   

Details
DOW’s Sylgard 160 Silicone Elastomer is a two part, 1 to 1 mix, dark gray, general purpose encapsulant with good flame resistance and flowability. This product is great for general potting material for connectors, industrial controls, power supplies, sensors and transformers. Sylard 160 has a rapid, versatile cure processing controlled by temperature. Dow’s brand of silicone encapsulants are well suited for the protection of electrical and electronic applications.
Additional Information
Additional Color, Sizes and Packaging

Dow Sylgard 160 A/B Silicone Elastomer 6 oz
Dow Sylgard 160 A/B Silicone Elastomer 210 ml 
Dow Sylgard 160 A/B Silicone Elastomer 600 ml 
Dow Sylgard 160 Part A Silicone Elastomer 5.4 kg 
Dow Sylgard 160 Part B Silicone Elastomer 5.4 kg 
Dow Sylgard 160 Part A Silicone Elastomer 55 lb 
Dow Sylgard 160 Part B Silicone Elastomer 55 lb 
Dow Sylgard 160 Part A Silicone Elastomer 226.7 kg

SKU DC2417618
Former SKU DC160B500LB
Part Number DC 160 PART B 226.7KG DR
Literature

Dow Solutions in Lamp and Luminaire Assembly      Dow Illuminating Innovations      Dow Lamp and Luminaire

Product Articles

Sylgard 160 Silicone Elastomer

Sylgard 160 is a silicone elastomer that is room temperature or heat accelerate cure. This advanced material is suitable as a general potting material for a variety of power supplies including connectors, industrial controls, sensors, and transformers...

Product Information

Sylard 160 Silicone Elastomer is suitable for general potting material for power supplies, connectors, sensors, industrial controls and transformers.   

Typical Use:
Sylgard 160 Silicone Elastomer is a two-part, 1 to 1 mix, dark gray, general purpose encapsulant with good flowability and flame resistance. This product is a room temperature or heat accelerated cure with moderate thermal conductivity. Sylgard 160 can be considered for used requiring added flame resistance. It is a rapid, versatile cure processing controlled by temperature.
 
One or Two-Part:
Two
 
Color:
Dark Gray to Black
 
Viscosity (Mixed):
4,865 cP (4.8 Pa-sec)
 
Cure Time:
24 hours @ 25 °C
 
Heat Cure Time at 100°C:
4 minutes
 
Dielectric Strength:
475 volts/mil / 19 kV/mm
 
Volume Resistivity:
5.6 E+14 ohm*cm
 
UL RTI Rating:
150°C
Technical Data Sheet

DOWNLOAD PDF FOR Dow Sylgard 160 TDS

Application Two Part
Cure Type Heat Cure, Room Temperature Cure
Chemistry Silicone
Product Category Encapsulants
Product Type Elastomer, Potting Material
Manufacturer DOW
Brand DOW
Industry Electronics
Manufacturer SKU 2417618
Related Search Terms Dow Corning 160, Dow Corning 160 sylgard, Dow Corning 160 silicone