| Additional Color, Sizes and Packaging | Dowsil SE 4445 CV Thermally Conductive Kit 40 KG |
|---|---|
| SKU | DC4025973 |
| Former SKU | 4025973-K |
| Part Number | DC SE 4445 CV KIT 210ML |
| Product Articles |
Dow SE 4445 is a two component, gray, thermally conductive, thermal interface wet dispensed polydimethylsiloxane gel. The density of the cured material is 2.36 g/cm3 and the viscosity is 15025 cP, 15025 mPa-sec and 15 pa-sec. The advanced silicone’s penetration is 50 per 1/10 mm and the thermal conductivity is 0.775 btu/hr ft degF or 1.34 W/mK... |
| Product Information | Dowsil SE 4445 CV is a thermally Conductive two-part, gray, silicone gel. Thermally Conductive gels couple the stress-relieving capability of a silicone gel with the ability to dissipate heat from the devices. These thermally conductive gels can be used as potting materials for transformers, power supplies, coils, relays and other electronic devices that require a low-module material for thermal dissipation. Typical Use:
Dowsil SE 4445 CV Thermally Conductive silicone gel is soft and cures to form a cushioning, low module, resilient, gelled material. Cured gels retain much of the stress relief capability while developing the dimensional stability of an elastomer.
Shelf Life at 25°C:
6 months
Density (cured):
2.36 g/cm3
Mix Ratio:
1:1
Viscosity (Mixed):
15025 cP, 15025 mPa-sec, 15 Pa-sec
Penetration:
50 1/10 mm
Thermal Conductivity:
0.775 btu/hr ft degF, 1.34 W/mK
UL Flammability Classification:
94 V-0 NA
|
| Technical Data Sheet | |
| Application | Two Part |
| Attribute | Thermally Conductive |
| Color | Gray |
| Characteristics | Gel |
| Cure Type | Heat Cure |
| Chemistry | Polymer, Silicone |
| Packaging | Kit |
| Product Category | Thermally Conductive Materials |
| Product Type | Elastomer |
| Manufacturer | DOW |
| Brand | DOW |
| Industry | General Industrial |
| Manufacturer SKU | 4025973 |
| Related Search Terms | Dow corning, thermal, conductive, gel, silicone, two component, gray, curing, potting electronic, addition, elastomer, kit, mix ratio |
Details
Dow SE 4445 CV Thermally Conductive Gel is a two-component, gray, heat-curing gel that is applied for potting electronic modules, gap fill products, and base products for a thermally conductive gel sheet among heat sinks and electronic heat sinks. This conductive gel encapsulant has UL 94 V-0 controlled and approved volatility. Dowsil SE 4445 CV is a thermally conductive silicone gel that offers low viscosity, cures to low modules, and wide service temperature range. This electronic silicone has a mix ratio of 1:1.
Additional Information
Krayden
Copyright © 2017 Krayden, Inc.