| Additional Color, Sizes and Packaging | Dow Sylgard 170 Silicone Encapsulant Elastomer Black 210 ML Bottle Kit |
|---|---|
| SKU | DC1696157 |
| Former SKU | DC1702LB |
| Part Number | DOWSIL 170 2LB KIT |
| Literature |
|
| Product Articles | More product information regarding Sylgard 170 Silicone Elastomer Dow 170 is a low cost, 2-part, black, silicon-based elastomer, and general purpose encapsulant. This silicone has good flowability, is flame resistant, and also comes in a fast cure form. |
| Product Information | DOWSIL Sylgard 170 is a black, two component, silicone well suited to be used as an encapsulant or potting material. The silicone elastomer delivers stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling.
Typical Use:
Used for potting and encapsulating high voltage resistor packs, amplifiers, transformers, industrial controls, sensors, connectors, and power supplies
Mix Ratio:
1:1
Viscosity Mixed:
2135 cP
Thermal Conductivity:
0.48 w/mK
Working Time at 25 Deg C:
15 Minutes
Cure Time at 25 Deg C:
24 Hours
Heat Cure Time at 100 Deg C:
10 Minutes
Durometer Shore A:
47
Dielectric Strength:
472 volts/mil
Composition:
Polydimethylsiloxane Silicone Elastomer
Volume Resistivity:
5.6E + 17 ohm *cm
|
| Technical Data Sheet | DOWNLOAD PDF FOR SYLGARD 170 TDS SILICONE ELASTOMER |
| Application | Two Part |
| Attribute | Thermally Conductive |
| Color | Black |
| Characteristics | Liquid |
| Cure Type | Room Temperature Cure |
| Chemistry | Silicone |
| Packaging | Kit |
| Product Category | Encapsulants, Thermally Conductive Materials |
| Product Type | Elastomer, Potting Material |
| Manufacturer | DOW |
| Brand | DOW |
| Industry | Electronics |
| Manufacturer SKU | 1696157 |
| Related Search Terms | Dow Corning 170, Sylgard 170 Cure time, Sylgard 170 Fast Cure Silicone Elastomer Kit, Sylgard 170 Density, Sylgard 170 Distributors, Dow Corning 170 Sylgard, Dow Corning 170 Sylgard A B, Dow Corning Sylgard 170 Silicone Encapsulant Black, DOWSIL Sylgard |
Details
Sylgard 170 is a two component, black, room temperature and heat curing silicone suitable to be used as an encapsulant or potting material. Potential applications include relays, high voltage resistor packs, amplifiers, transformers, industrial controls, sensors, connectors, and power supplies. Dow Sylgard 170 Silicone Elastomer provides moderate thermal conductivity, good flowability, long working time, low viscosity, and flame resistance. The polydimethylsiloxane silicone elastomer delivers stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling. Application method includes manual mixing, automated mixing and dispensing. Dow Sylgard 170 mix ratio is 1:1.
Additional Information
Krayden
Copyright © 2017 Krayden, Inc.