Dow Corning SE 4445

Dow Corning SE 4445 is a two component, thermally conductive, thermal interface silicone gel used for potting electronic devices Dow Corning SE 4445 is a two component, gray, thermally conductive, thermal interface wet dispensed polydimethylsiloxane gel. Density of the cured material is 2.36 g/cm3 and the viscosity is 15025 cP, 15025 mPa-sec and 15 pa-sec.…

Loctite AA 3211

Loctite AA 3211 is a Single Component, Medium Thixotropic Acrylic Adhesive Designed for Bonding Polycarbonate to itself Loctite AA 3211 is a single component, medium thixotropic acrylic material formulated for bonding polycarbonate to itself while not inducing stress cracking under typical mold levels. The advance product will cure quickly to form a flexible, transparent bond…

Molykote G-Rapid Plus

Molykote G-Rapid Plus Paste is a Solid Paste Lubricant with Low Friction for the Assembly and Running in of Metallic Components. Molykote G-Rapid Plus is a paste designed for lubricating with low friction designed for running-in of metallic components and assembly. The specialty lubricant offers high pressure absorption capacity, suppresses stick-slip, provides emergency running performance…

Loctite Frekote R220

Loctite Frekote R220 is a mold release that offers excellent release and slip properties for the most demanding rubber mold applicaiton. Loctite Frekote R220 is a fast curing, non-flammable, multiple releases, water based emulsion. This advance material provides excellent release and slip properties and is recommended for rubber molding applications including EPDM rubber. The chemical…

Krayden Receives the 2014 Boeing Performance Excellence Award

Krayden is proud to announce it has received 2014 Boeing Performance Excellence Award becoming an 8 time BPEA recipient. The Boeing Company issues the award annually to recognize suppliers who have achieved superior performance. Krayden has maintained a minimum Silver composite performance rating for each month from October 1, 2013, to September 30, 2014. The…

Molykote EM-30L

Molykote EM-30L Lubricating Grease Designed for Plastic Components Molykote EM-30L is a lubricating grease designed for plastic substrates. It can be used for plastic to plastic contact, metal to metal contact and plastic to metal contact. The advance product offers low seepage, so it can be used in places that cleanliness is required. It offers…