Many sensitive and challenging electronic applications necessitate proper protection of delicate circuit boards and its components. This means that the silicone which makes up the circuit board needs to be protected to preserve longer the abilities to function over widely varying temperatures, dielectric insulation, obstruct environmental contaminants and of stress and shock absorption. Dow Corning..
read moreKrayden will be showcasing our suppliers cutting edge technologies at the SAMPE TECH 2011 Expo scheduled to take place October 18-19. Come visit our booth #211 at the Omni Fort Worth Hotel in Texas to view our full product line of engineered materials including; Dow Corning, Henkel, Lord, Huntsman, Chomerics, Cytec, Humiseal, and more. Krayden..
read moreTargeted for solar and related applications, the UV40 SOLAR was formulated for use under prolonged exposure to sunlight and resists discoloring and degradation. This one-part, low viscosity, conformal coating is targeted for solar CPV (Concentrated Photovoltaic Technology) cells and weather exposed systems such as LED signs and displays. This is new technology and has the..
read moreTC-5026 was engineered with reliability in mind, solvent free for better stability. This thermal grease is one of the best performing and most reliable in the market, based on independent customer testing. This one part, silicone based, thermally conductive compound contains a high concentration of advanced silicone fluid to reduce pump out during thermal cycling. ..
read moreThe low cost silicone based elastomer, Dow Corning 170 is a 2-part, black, general purpose encapsulant. This silicone has good flowability, is flame resistant and also comes in a fast cure form. Some benefits of Sylgard 170 are the flexibility in curing, offering room temperature or heat accelerated options, it has moderate thermal conductivity, is..
read moreThe 3145 RTV gray or 3145 RTV CLR are used for sealing openings in housing and modules, sealing around electrical wires and leads while also offering stability mechanically to circuits components in the assembly of PWBs. This non flowing RTV offers high tensile strength with elongation, peel and lap shear values. The silicone adhesive/sealant has..
read moreThe Molykote 111 valve lubricant and sealant, available from Krayden, Inc. adhesive and sealant distributors, is a silicone oil offering water resistance, low vapor pressure, low volatility and a wide service temperature range of -40 °C/-40°F to 200°C/392°F. The Dow Corning Molykote 111 lubricant and sealant is a heavy consistency dimethyl silicone compound that offers..
read moreThe popular Humiseal UV40 conformal coating is now available as a gel. The Uv40 gel by Humiseal was formulated specifically for some large scale LED (light emitting diode) applications including the huge LED displays that are seen in sporting stadiums where a light weight coating was needed. Humiseal UV40 gel is ideal when a light..
read moreDesigned for high vacuum and fast pumping of large volumes of gas or vapor in production, the Dow Corning 702 fluid is used in vapor ejector pumps that attain vacuums of 10-4 or 1-05 torr. The DC 702 diffusion pump fluid used in electronics, aviation and aerospace is silicone based with thermal stability offering resistance..
read moreThe Sylgard 160 elastomer by Dow Corning is a grey two part silicone flowable liquid. Curing to a flexible elastomer with a constant cure rate regardless of sectional thickness or degree confinement. The Dow Corning 160 encapsulant can be used for protection of electrical / electronic components and devices from environments that have high humidity..
read more