Buy Molykote D-708
Molykote D-708 is an anti-friction coating that is used for lubrication/corrosion protection of metal/plastic and metal/plastic pairings under low to medium loads. This advanced material offers excellent corrosion protection and a low coefficient of friction. The cured film will have an operating temperature range of -60 to 240 degrees Celsius. This product is also well suited for automotive applications including safety belt components, door locks as well as transmission parts.
Molykote D 708 AF Coating has a density of .95 g/ml at 25 degrees Celsius and the flash point is at 0 degrees Celsius. Cure time will take approximately 60 minutes at 180 degrees Celsius and 20 minutes at 200 degrees Celsius. The visual appearance of this material is glossy black. Molykote D-708 is specifically designed to provide corrosion protection and lubrication properties as well as a high quality surface finish. This product is a dispersion of solid lubricants in an organic resin solvent system.
Before using Molykote D708 Anti-Friction Coating it is recommended to stir well. All surfaces should be cleaned and degreased before application. This innovative coating is formulated to be applied by either dip coating or spraying. The thickness of the film needs to be between 5-15 microns for the material to properly work. Viscosity can be adjusted by diluting the coating with a methyl ethyl ketone (MEK) solvent. This product is well suited for automotive applications as well as many others, but it has not been tested nor deemed suitable as an anti-friction coating for pharmaceutical and medical applications. For more information on this material, contact Krayden, and a certified representative will assist you with any questions that you may have.
When handling this coating, it is strongly recommended to read and understand the proper precautions and storage information on the Molykote D-708 MSDS. The anti-frication coating will have a shelf life of 6 months when kept in its original, sealed container at a temperature above -18 degrees Celsius. Molykote D-708 is offered in 18 liter pails. The coefficient of friction is 0.11 and the Falex pressure resistance is 1220 Newtons per ASTM D 2625.
Molykote is well known worldwide for developing innovative specialty lubricants designed for a variety of industries. The research and development put into each product is what makes Molykote lubricants so advanced and cutting-edge. Molykote D-708 is a state-of-the-art anti-friction lubricant used for lubrication in metal to metal and metal to plastic combinations while offering excellent corrosion protection. For more information on the sizing or application methods, contact Krayden, a certified distributor of Molykote products. More information can also be found on the Molykote D-708 Technical Data Sheet.