The Loctite 495 SuperBonder Instant Adhesive is a cyanoacrylate adhesive and was designed originally for thread-locking. Presently it has been developed to bond various materials. When Loctite 495 curing time and shelf life are followed accurately, its maximum mechanical parts bonding strength and optimum storage period are achieved respectively. This product has a Mil-A-46050C in the Loctite 495 MSDS sheet.
Sometime in 1953 frequent machine failures which were caused by the loosening of mechanical fasteners due to machine’s vibration were so widespread. American Sealants which was acquired by Henkel Corporation discovered the Loctite sealant and promoted it as a thread-locking solution which successfully solves the problem.
|Product Name : Henkel Loctite 495 Super Bonder Instant Adhesive
Part Number : 49561.
Description : LOCTITE 495 is a cyanoacrylate instant adhesive.
Technology : Cyanoacrylate
Chemical type : Ethyl cyanoacrylate
Appearance : Transparent, colorless to straw colored liquid MS
Components : One part – requires no mixing
Viscosity : Low.
Application : Bonding
Key Substrates : Plastics, rubbers and metals
Fixture Time : 5 – 20 s
Temp. Optg. : – 40 to +80°C
Viscosity mPa.s: 30
BUY LOCTITE 495
Today Henkel Corporation, the manufacturer of Loctite 495 Instant Adhesive has expanded its usage to bond rubber, metal, plastic parts, etc. Its bonding effectiveness can still be attained with gaps of up to 0.004 inch. Furthermore aside from its classification as adhesive, it has been used widely as a sealant and surface treatment material. Currently this product has been serving the industries in aerospace, energy, automotive manufacturing, repair and maintenance, and many more.
The precise implementation of the Loctite 495 curing time procedures will result to achieving its full functional strength. One of the prerequisites in obtaining best result is to clean the surfaces thoroughly and should be free from oil and grease. Upon product application permit it to cure for at least 24 hours to allow full chemical and solvent resistance to develop.
There are some parameters to be observed such as cure speed, substrate, relative humidity, temperature, and bonding gap. The curing rate is dependent on these factors, and there are distinct results for every set of data combination. For getting the best result you may seek the assistance of Henkel Corporation’s local distributor.
Get Help from Krayden’s Professional Regarding Loctite 495 Application
For safe the application of Loctite 495 Super Bonder Instant Adhesive, it should be understood that this product should not be used in pure oxygen and/or oxygen rich areas. Furthermore it should not be chosen as a sealant for chlorine or other strong oxidizing materials. For more details please see our expert technical personnel which is available from our local distributor.
The storage of Loctite 495 Super Bonder Instant Adhesive is quite intricate. This product should be stored in a dry and in refrigerated condition. The suggested temperatures of the storage should be maintained at all times at 2 °C to 8 °C. A storage temperature below 2 °C or greater than 8 °C can have harmful effect on its product properties.
Product content taken out from its container should not be returned to its original container as it may be contaminated during use. For more information please contact our customer service representative which is available from our local distributor. More information on Loctite 495 Super Glue.
Loctite 495 Instant Adhesive Products