Buy Loctite 4902
Loctite 4902 is a highly flexible, one part, low viscosity, humidity cure, cyanoacrylate adhesive designed for the assembly of flexible medical devices. This advanced adhesive is well suited for use on dissimilar substrates including plastics, rubbers and metals. It offers significant performance enhancements compared to regular cyanoacrylates, including flexing bond lines, the strength as well as high resistance to leaks with its excellent sealing capabilities.
The rate of cure will depend on the bondline gap, ambient relative humidity, and the type of substrate used. Loctite 4902 Cyanoacrylate Adhesive uncured will have a specific gravity of 1.03 at 25 degrees and a flash point between 80-93 degrees Celsius. The physical state of the product is a liquid that is clear. Vapor pressure is < 0.2 mm hg and the boiling point range is >149 degrees Celsius. Auto-ignition temperature is 485 degrees Celsius and the vapor density of this material is approximately 3. Key substrates Loctite 4902 is well suited for includes plastics, rubber and metals.
Bond areas need to completely clean and free from dust, dirt or any grease. Cleaning can be done by using a Loctite cleaning solvent. Bonding capabilities can be improved on low energy plastic surfaces by using a primer with the adhesive. Apply adhesive on one of the substrates surfaces and assemble the parts together within minutes. Substrates need to be fixed together until adhesive has fixtured. Full strength will typically be in 24 to 72 hours after assembly. Loctite 4902 works best in thin bond gaps (0.05MM/2 mil). If more information is required, contact Krayden and certified technical representative will answer any questions that you may have.
Reading and understand the Loctite 4902 MSDS is strongly recommended before using. It should not be used in pure oxygen systems nor used as a sealant for strong oxidizing materials such as chlorine. Store the material in its unopened container in a dry location. The temperature should be between 2 to 8 degrees Celsius. Storing at any temperature below 2 and above 8 may change its properties. Product removed from the container should be discarded and not returned to the container. This will reduce the risk of contamination. For more information in regards to this innovative adhesive, visit the Loctite 4902 MSDS.
Loctite manufactures state-of the art adhesive, sealants and other specialty chemicals. Engineers at Henkel have spent countless hours researching and developing these products for many different applications in various industries. Loctite 4902 is a highly flexible adhesive formulated for the assembly of disposable medical devices. Henkel formulated this product to facilitate the use of dissimilar and opaque substrates while enhancing performance. Krayden is a certified supplier of Henkel products. More information can be found on the Loctite 4902 Technical Data Sheets.