Dow Corning 732 Clear Silicone is a multipurpose sealant used for general industrial sealing and bonding. It has the capability to bond or seal a wide variety of plastics, metals and many other substrates that do not bond well. This silicone sealant is manufactured in a non-sag, clear paste with excellent dielectric properties, complying with FDA 177.2600 and MIL-A-46106A specifications. It also becomes tack-free in less than 45 minutes.
Dow Corning 732 Clear Silicone Sealant is a one part sealant that cures in room temperature when it is exposed to moisture. This product is easy to apply, curing to a flexible rubber in twenty four hours at room temperature and 50 percent humidity. Dow Corning 732 Clear Silicone Sealant remains stable and flexible from a temperature range of -60 to 180 degrees Celsius, with short peaks up to 205 degrees Celsius. Dow Corning 732 will cure at a depth of 3 mm. The greater amount of sealant used and a lower humidity level will cause the curing process to take longer because moisture is limited.
Dow Corning 732 Clear Silicone sealant is effective in bonding and sealing many substrates, but may cause corrosion on a few metallic parts due to the small amount of acetic acid which is released during the cure process. This product has not been tested or represented as suitable to be used for pharmaceutical or medical uses. It is imperative to understand the risks and dangers when applying Dow Corning 732 Clear Silicone. If used incorrectly, there may be a danger for a physical and health hazard. This high quality silicone has a shelf life of 30 months from the date of production when unopened and stored at or below 32 degrees Celsius in its original container.
Dow Corning 732 Clear Silicone Sealant comes in a variety of different containers. Unprimed adhesion may be obtained on many different materials such metals, glass and engineered plastics. It also may adhere to many substrates that normally do not have good adhesion such as polyethylene, PTFE, polypropylene and other materials. Dow Corning 732 Clear Silicone has excellent bonding and sealing properties, the bonding strength will differ depending on the type of substrates used.
Dow Corning 732 Clear is produced with the highest quality silicone material provided in the industry. Dow Corning is a leader in providing advanced engineered formulations when manufacturing general purpose sealants and adhesives. Dow Corning 732 is a very high performing general purpose sealant that can be bonded to a variety of substrates. For more information regarding the sizes or the applications of Dow Corning 732, contact Krayden, Inc. Dow Corning’s certified sealant and adhesives distributors.