Circalok 6035 is a two component, low viscosity, flame retardant, room temperature curing potting material. This advanced product mixed together is visually a black color and the viscosity at 25 degrees Celsius is 12,000 cps. It has a tensile strength of 5,000 psi and the elongation is approximately 5 percent. The service temperature is between -65 to 155 degrees Celsius.
LORD Circalok 6035 has a thermal conductivity o 1.0 w/mK and the specific gravity mixed is 1.57 g/cc. The mix ratio for this potting compound is 1 to 1 by weight to volume and the pot life at 24 degrees Celsius will be 2 hours. It can be cured at room temperature which will take 24 hours or if time is an issue, heat can be applied up to 65 degrees Celsius decreasing the cure time to 2 hours. The Hardness Shore D of Circalock Part B is 75.
This innovative product has excellent electrical properties. The dielectric constant at 100 Hz is 4.1 and the dissipation factor at 100 Hz is .025. Dielectric Strength is between 450 and 500 volts/mil. This epoxy material is formulated to meet specific requirements of customers and the values are just averages. Circalok 6035 meets the requirements of UL94V-0. Mixing should be done thoroughly before applying.
When handling a material such as LORD Circalok 6035, it is strongly recommended to understand the safety precautions and the proper application methods. Circalok 6035 A and B have a shelf life of 12 months from the date of shipment if it is stored in it is original, unopened container. It is important to avoid all contact with skin and eyes if possible. This material may be corrosive to skin and the eyes. If the correct handling precautions are taken, the risk of injuries decreases. For further information in regards to the safe handling of this advanced material can be contained in the LORD Circalok 6035 MSDS.
LORD produces a extensive variety of innovative adhesive, sealants and coatings that meet the required demands of different industries worldwide. Circalok 6035 is formulated to be a low viscosity, flame retardant, room temperature curing potting compound. LORD is recognized worldwide for formulating ground-breaking products utilizing progressive technologies, an extraordinary engineering style and thousands of hours of product development and research. LORD Circalok 6035 is a highly advanced epoxy material that meets the requirements of UL94N-0.For knowledgeable information with concerns to the safe handling, proper application methods, or the appropriate sizing, contact Krayden, Inc., LORD’s certified distributors of specialty chemicals, adhesives and sealants. If more information is needed, you can obtain it by visiting the LORD Circalok 6035.